Standard Code - 1234 or 0000 unlock Motors 19h: up to version 1.71 - code 19980722, for the higher version and C200,C205 - code 20010903
Removing code C350
1. * # 06 #
2.Nazhimaem the Menu then 048263 * (buttons to press quickly for 2 seconds)
3.Poyavitsya input field
4.Vvodite 18 * 0 (Master Reset)
5.Vvodite 18 * 1 (Master Clear)
codes to unlock cell phones.
master code for Motorola T205/T190/T191
master code - 19980722 ok
(T190, T191, T205) master code
- 19980722
- 20010903
P2K test menu:
* # 06 #, menu, menu, 048263 *
Test comands:
32 * 116 * 1 * 0 * 0 - read phonecode
32 * 118 * 1 * 0 * 0 - read security code
18 * 0 - factory reset, phone code off
18 * 1 - master reset
54 * 18 * 1 - full phone reset
10 * 0 * 6 - select 900/1800
32 * 279 * 1 * 0 * 8 - model
32 * 383 * 1 * 0 * 0 - flex version
Hard reset MPx200 - blue button power on
Codes for Motorola:
View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p>OK (reboot)
Set alarm for incoming messagesppp276p1p>
There is a possibility to send SMSfrom Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial only works with newfirmware
To include a new menu item"Game" should dial only works with new firmware
To enable the new game Bricks should dial only works with newfirmware
To enable the new game Tower of Hanoi should dial only works with new firmware
To enable the new game of Baccarat, type only works with new firmware
To enable the new calculator should dial only works with newfirmware
TEST MODE - new to enter the Test Mode, to the main menu, hold for 3-4 seconds press "#"
In order to use some functions in menu mode you can enter thetest cell, and "#"
01 # - Exit Test Mode
19 # - shows the software version
57 # - resets all the phone settings to factory
MOTOROLLA T2288
View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p>OK (reboot)
Set alarm for incoming messagesppp276p1p>
There is a possibility to send SMSfrom Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial works only with newfirmware
To include a new menu item"games" have to muster only works with new firmware
To enable the new game Bricks should dial works only with newfirmware
To enable the new game Tower of Hanoi should dial works only with new firmware
To enable the new game of Baccarat, dial only works with new firmware
To enable the new calculator should dial works only with new firmware Service menu in the Motorola C350 (suitable for many other"version of C禄)
To enter the service menu must quickly press the combination ofthe following buttons: Menyu048263 *
The screen should be prompted to enter commands: Opcode:___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone. (54 * - obligatory forall the top teams)
Teams:
0 * 0 * 0 Select tone 0
0 * 0 * 1 Select tone 1
0 * 0 * 2 Select tone 2
0 * 0 * 3 Select tone 3
0 * 0 * 4 Select tone 4
0 * 0 * 5 Select tone 5
0 * 0 * 6 Select tone 6
0 * 0 * 7 Select tone 7
0 * 0 * 8 Select tone 8
0 * 0 * 9 Select tone 9
0 * 0 * 124 Select tone 1 KHz
0 * 0 * 125 Select tone 2 KHz
0 * 0 * 126 Select tone 3 KHz
0 * 0 * 127 Select tone 4 KHz
0 * 1 * X Disable tone X
3 * 0 * 1 Enable vibrator
3 * 0 * 0 Disable vibrator
4 * 3 * 1 Enable speech coder fullrate Audio loopback
4 * 3 * 0 Disable speech coder full rate
4 * 4 * 1 Enable speech coder enhanced full rate
1936 January 23, 2003 6809456A82
Troubleshooting C350 Series
4 * 4 * 0 Disable speech coder enhanced full rate
4 * 5 * 1 Enable speech coder half rate
4 * 5 * 0 Disable speech coder half rate
5 * 0 * 0 Set audio level 0 Audio level
5 * 0 * 1 Set audio level 1
5 * 0 * 2 Set audio level 2
5 * 0 * 3 Set audio level 3
5 * 0 * 4 Set audio level 4
5 * 0 * 5 Set audio level 5
5 * 0 * 6 Set audio level 6
5 * 0 * 7 Set audio level 7
5 * 0 * 8 Set audio level 8
5 * 0 * 9 Set audio level 9
5 * 0 * 10 Set audio level 10
5 * 0 * 11 Set audio level 11
5 * 0 * 12 Set audio level 12
5 * 0 * 13 Set audio level 13
5 * 0 * 14 Set audio level 14
5 * 0 * 15 Set audio level 15
6 * 2 * 2 * 0 * 0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6 * 4 * 6 * 0 * 0 Set Audio Path. Boom Mic, Boom Spk, RX unmute,TX unmute
10 * 0 * 3 Set band GSM 900
10 * 0 * 4 Set band DCS 1800
10 * 0 * 5 Set band PCS 1900
10 * 0 * 6 Set dual band GSM 900/ 1800
10 * 1 * 0 Read band 3 = GSM 4= DCS 5 = PCS 6 = GSM / DCS
18 * 0 Initialize non-volatile memory (Master Reset)
18 * 1 Initialize Non-volatile memory (Master Clear)
20 * X * 0 Load Channel number X Select Channel (Used for debugging Rx mode)
20 * 1 * 0 Load channel number 1 GSM Low channel
20 * 62 * 0 Load channel number 62 GSM Mid channel
20 * 124 * 0 Load channel number 124 GSM High channel
20 * 512 * 0 Load channel number 512 DCS Low channel
20 * 700 * 0 Load channel number 700 DCS Mid channel
20 * 885 * 0 Load channel number 885 CDS High channel
20 * 512 * 0 Load channel number 512 PCS Low channel
20 * 661 * 0 Load channel number 661 PCS Mid channel
20 * 810 * 0 Load channel number 810 PCS High channel
55 * 2 * 001 Test Display. All pixels ON
55 * 2 * 000 Test Display. All pixels OFF
55 * 2 * 002 Test Display.
Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function / Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55 * 2 * 003 Test Display. Checkerboard pattern B
55 * 2 * 004 Test Display. Borderpixels ON
* # 06 # IMEI Check No Test Mode Required For dessert:
NETMONITOR included: Menu, 00** 83786633 *
OFF: MENU 00 ** 8378633 *
press must be very fast. turn off the tube, and it appears eachtime you switch. Exit menu / back: menu, left soft key
Photo caller instead of the standard images
Posted: WR, On: Feb-01-2004
Photo caller
For a long time, I racked my brains how to put that person's caller fotografiyu.Moy korefan all to get, saying that its SiemensM55 is easily done without much straining (a skunk). And then I got the idea: "What if the image upload to your phone with the same name, which is in the icons that you can assign a caller?" I immediately got into the menu, the phone book to see how these are called the standard icons, as thought that the name of the icon should not differ from the file name in which it is stored. Seeing all the names in Russian, I was disappointed and thought that for a long time will have to sit with the translator, choosing the right name for each. The first thing I tried to fill in your phone a picture with the name boss.gif. And oh, yes! Happened!Instead of a suit and tie on the screen proudly sported my picture. I've started to gather to pick English names of files, but itdawned on me. What am I doing? Everything is already in the phone! Just have to switch to English. Everything turned out, instead of standard icons, I uploaded pictures of my friends and my girlfriend. The size of the standard icons 32 * 32, the maximum size of pictures that I filled the phone 65 * 65. Most have not tried and do not adviseit, better even less, as a picture of a large size closes the caller's name.
List of files that can be replaced with pictures of friends.
Robot - robot.gif
UFO - ufo.gif
Abomination - stinky.gif
Family - family.gif
Star - superstar.gif
Nerd - brainy.gif
Skin - baldy.gif
Fan - fan.gif
Pal - buddy.gif
Charm - delicius.gif
Gizmo - cute.gif
Kid - kid.gif
Awful - yucky.gif
Cutie - sweetie.gif
Boss - boss.gif
Charm - delicious.gif Own melody when you turn on / off the phone.
To play its tune when you turn on / off the phone to fill in yourphone ringing with the name~***** File034.mid \ ~***** File029.mid respectively. I do notrecommend pouring tune longerthan 10 seconds.
Picture when the phone instead of the label "Search Network".
Fill up the phone any image or animation, entitled"custwakeup". Then run the program MSS 3.2.3. Select the tabOther functions, putting a checkmark «Activate Wakeup graphics» and press «Activate selected features». Then restart your phone by clicking on «Restart the phone».
Retrieved on TeleTac250, Profile300e
So: how to break the password (eg you turn someone else's phone, and it highlights Loc'd and default password of "123" does not apply):
-Turn on the phone
Apparently Loc'd
-Click (FNC) -00 ** 83,786,633 - (STO) - # (the entrance to the service mode) - in the end should see US '-press 55 # - this set up custom settings, click a few times * until we see the flashing lights on the stage 7 and 000000, zero is the system code that must be entered in the"legal" change your password
-Click again * and we see flashing on stage 8 (we do not need it) and three-digit number -a password, which we need-now you can turn off the phone, but when you switch to dial the same code of three digits!
Master reset your phone, you may need for example when selling phone:
-Turn on the phone
- Hit (FNC) -00 ** 83,786,633 - (STO) - # (the entrance to the service mode) - in the end should see US '
-We press 32 # (need to wait until piknet or reboot)
-Clears all timers, all of the phonebook, all your settings back to default state;
the settings of your statement will essno (phone rezet about a minute) ...
codes for Motorola (can not remember whose article ... thanks aftoru To enter the service menu must quickly press the combination ofthe following buttons: Menyu048263 *
The screen should be prompted to enter commands: Opcode:___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone.
Rollback (return to previous state) is just - let's say you wantto return the operator logo, dial Opcode and field 1,2,3,4 are the same as there, and field 5 (d) as in the string is rolled back. Everything.
Teams:
Check the microphone / speaker (loopback):
4 * 5 * 1
Phone code reading:
32 * 116 * 1 * 0 * 0
Reading the security code:
32 * 118 * 1 * 0 * 0
(Code pops up in a format 0030003000300030 ...
every fourth digit required, thenyou can fill in this case is four 0)
Check the transmitter:
10 * 0 * 6 - select the range of 900/1800
20 * N * 0 - N-channel selection
45 * M - M-choose the power level
7 * 0 * 1 - the inclusion of the DWP, transmission zeros
7 * 1 * 1 - the inclusion of the DWP, the transfer of units.Master Reset 18 * 0
Master Clear 18 * 1
Hide opepatopa
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 116 »« OK »
Field 4 "1» «OK»
Field 5 (D) «016» «OK»
Otkat: Field 5 (D) «000» «OK»Results
F1: 0
And this:
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 1975 »« OK »
Field 4 "1» «OK»
Field 5 (D) «255» «OK»
Otkat: Field 5 (D) «191» «OK»
Results
F1: 0
Remove date Uclovie:
Halichie podklyuchennoy yclygi GPRS
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Otkat: Field 5 (D) "000" "OK"
Results
F1: 0
Bce, kak tolko znachek GPRS poyavitcya nA ekpane, date is iccheznet.
Remove icon line
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 1931 »« OK »
Field 4 "1» «OK»
Field 5 (D) «231» «OK»
Otkat: Field 5 (D) «247» «OK»
Results
F1: 0
Inzhenepnoe the menu:Bxodim in the menu «Opcode»
048263 *
Bvodim znacheniya:
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 1968 »« OK »
Field 4 "1» «OK»
Field 5 (D) «183» «OK»
-> Otkat: Field 5 (D) «007» «OK»Results
F1: 0
Poyavlyaelcya: Menyu -> Oficnyecpedctva -> Texnologiya
Kypcop in glavnom pocepedine the menu:
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 107 »« OK »
Field 4 "1» «OK»
Field 5 (D) «176» «OK»
-> Otkat: Field 5 (D) «160» «OK»
Results
F1: 0
Aktivatsiya the menu "Yapkoct:
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 116 »« OK »
Field 4 "1» «OK»
Field 5 (D) «064» «OK»
-> Otkat: Field 5 (D) «000» «OK»
Results
F1: 0
Poyavlyaetcya: Menyu-> Papametpy-> Icxodnaya nactpoyka
PS Robin if the copyright-left and all that, treat)))
Then there are the other teams, they should start with 54 *, for example Select tone 0 is 54 * 0 * 0 * 0
Tones and Vibration
0 * 0 * 0 Select tone 0
0 * 0 * 1 Select tone 1
0 * 0 * 2 Select tone 2
0 * 0 * 3 Select tone 3
0 * 0 * 4 Select tone 4
0 * 0 * 5 Select tone 5
0 * 0 * 6 Select tone 6
0 * 0 * 7 Select tone 7
0 * 0 * 8 Select tone 8
0 * 0 * 9 Select tone 9
0 * 0 * 124 Select tone 1 KHz
0 * 0 * 125 Select tone 2 KHz
0 * 0 * 126 Select tone 3 KHz
0 * 0 * 127 Select tone 4 KHz
0 * 1 * X Disable tone X
3 * 0 * 1 Enable vibration
3 * 0 * 0 Disable vibration
Customize the quality of decoding, transmission and reception of speech
4 * 3 * 1 Enable speech coder fullquality (fr)
4 * 3 * 0 Disable speech coder full quality (fr)
4 * 4 * 1 Enable speech coder of the overall quality (efr)
4 * 4 * 0 Disable speech coder ofthe overall quality (efr)
4 * 5 * 1 Enable speech coder quality halved (hr)
4 * 5 * 0 Disable speech coder quality halved (hr)
Setting the ring volume and sound
5 * 0 * 0 Volume 0
5 * 0 * 1 Volume 1
5 * 0 * 2 Volume 2
5 * 0 * 3 Volume 3
5 * 0 * 4 Level Volume 4
5 * 0 * 5 Volume 5
5 * 0 * 6 Volume 6
5 * 0 * 7 Volume 7
5 * 0 * 8 Volume 8
5 * 0 * 9 Volume 9
5 * 0 * 10 Volume 10
5 * 0 * 11 Volume 11
5 * 0 * 12 Volume 12
5 * 0 * 13 Volume 13
5 * 0 * 14 Volume 14
5 * 0 * 1915 Volume 15. It seems that value is more than can install itself on your phone
6 * 2 * 2 * 0 * 0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute (xs that is)
6 * 4 * 6 * 0 * 0 Set Audio Path. Boom Mic, Boom Spk, RX unmute,TX unmute (do not know either)
Config - GSM, etc.
10 * 0 * 3 Set the frequency of GSM 900
10 * 0 * 4 Set the frequency of DCS 1800
10 * 0 * 5 Set the frequency of PCS 1900
10 * 0 * 6 Set the double frequency GSM 900 / 1800
10 * 1 * 0 Read frequency 3 = GSM 4 = DCS 5 = PCS 6 = GSM / DCS
18 * 0 Initialize nepereproshivaemuyu memory (Master Reset - a complete reboot)
18 * 1 Initialize nepereproshivaemuyu memory (Master Clear - thorough cleaning)
20 * X * 0 Load channel number X is selected channel (used for debugging Rx mode)
20 * 1 * 0 Load channel number 1 GSM channel bottom
20 * 62 * 0 Load channel number 62 GSM Middle Channel
20 * 124 * 0 Load channel number 124 GSM High channel
20 * 512 * 0 Load channel number 512 DCS lower channel
20 * 700 * 0 Load channel number 700 DCS average channel
20 * 885 * 0 Load channel number 885 CDS High channel
20 * 512 * 0 Load channel number 512 PCS Lower channel
20 * 661 * 0 Load channel number 661 PCS average channel
20 * 810 * 0 Load channel number 810 PCS High channel
Testing of the display (for example, for the presence of broken pixels)
55 * 2 * 001 Include all the pixels
55 * 2 * 000 Disable all the pixels
55 * 2 * 002 Test Display. A test sample
55 * 2 * 003 Test Display. Test sample B
55 * 2 * 004 Test Display. Borderpixels are included
55 * 2 * 0xx (xx = from 05 to 14 or up to 13). Tests of the monitor in color mode
To run the menu you need to quickly press the following buttons: Menu, 0, 4, 8, 2, 6, 3, *. You should see the inscription:"Opcode:". This is the service menu. We'll use two commands: 32 - Reading, 47 - a record!
Be careful when using the Commando 47. If you make a mistake, you can change ANY UNKNOWN Setting up the phone,which can lead to any actions! AND MORE! In the service menu of the phone all the numbers must be entered in decimal. A phone you all the shows in shecnadtsatepichnoy system of calculation (using a read command).
It remains only to understand example. Including engineering the phone menu.
All infa will be supplied in this form:
Opcode 47 "OK"
Field 1 50 "OK"
Field 2 1 "OK"
Field March 1968 "OK"
Field 1 April "OK"
Field 5 (D) 247 "OK"
Otkat: Field 5 (D) 135
Results
F1: 0
Now let's see what this all means:
After logging in engineering menu enter 47 - the team record, click OK.
Let us examine the fields Field:
"Field 1" - is the number of memory cells.
"Field 2" - a record number.
"Field 3" - is bytes from which tobegin displaying the contents ofthe record.
"Field 4" - the number of bytes to be displayed on the screen, starting with the fact that we have indicated in "Field 3".
"Field 5" - is actually the value ofthe desired bits.
Otkat - the value of the field"Field 5" which must be entered to cancel the changes.
"Results F1: 0" - you'll see, if everything went without problems.
After introducing all of this into the phone reboot it and see thatthe Office "appeared menu item - technology.
Similarly, we use a team of 32.
Updated (13/11/2004): As most know the value for the rollback.
To do this, use the command 32.
Let us consider the example of on / off additional Vibrate:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
Field 5 (D) "252" "OK"
Results
F1: 0
Do you have the above text, butthe values of the rollback is not there. What should I do?
Put in the phone the same parameters, but with a read command:
Opcode "32" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
After the introduction we get:
F1: 0
F2 (D): 8c
(Do you instead of 8c may be a different value)
As I have said, the phone displays all the information in hexadecimal. 8c translate into the decimal system: we get 140. This is important for rolling back!
Note: In Windows takes a standard calculator, engineering make it, put a "Hex" - 16-tirichnaya system, we collect what we see on the screen, click the "Dec" - the number obtained in the decimal system. That is code for enabling / disabling certain menu items and more:Inclusion of the 2 nd sim card:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "28" "OK"
Field 4 "1" "OK"
Field 5 (D) "169" "OK"
-> Otkat: Field 5 (D) "168" "OK"
Results
F1: 0
Shows "Ppedpochtitelnaya Map and in the Options -> More Settings -> Initial Setup.
To disable the operator logo to make changes in 2 stages:
1 etap:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "016" "OK"
Otkat: Field 5 (D) "000" "OK"
Results
F1: 0
2 etap:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "75" "OK"
Field 4 "1" "OK"
Field 5 (D) "255" "OK"
Otkat: Field 5 (D) "191" "OK"
Results
F1: 0
Disabling the icon line:
Bxodim in the menu "Opcode"
Menyu -> 048 263 *
Enter a value:
Opcode "47" "OK"Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "31" "OK"
Field 4 "1" "OK"
Field 5 (D) "231" "OK"
Otkat: Field 5 (D) "247" "OK"
Results
F1: 0
Disabling dates: (CONDITIONS: nalichie podklyuchennoy yclygi GPRS)
Enter the menu "Opcode"
Menyu -> 048 263 *
Bvodim znacheniya:
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Otkat: Field 5 (D) "000" "OK"
Results
F1: 0
Disabling the screen saver to activate:
Enter the menu "Opcode"
Menyu -> 048 263 *
Bvodim znacheniya:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "29" "OK"
Field 4 "1" "OK"
Field 5 (D) "112" "OK"
Results
F1: 0
Disable the screen saver on shutdown:
Enter the menu "Opcode"
Menyu -> 048 263 *
Bvodim znacheniya:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "70" "OK"
Field 4 "1" "OK"
Field 5 (D) "223" "OK"
Results
F1: 0
>> If ye otklyucheno the menu"Chat" Field 5 (D) "255" "OK"
Bklyuchenie polzovatelckoy gpafiki:
Enter the menu "Opcode"
Menyu -> 048 263 *
Bvodim znacheniya:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "35" "OK"
Field 4 "1" "OK"
Field 5 (D) "001" "OK"
Results
F1: 0
Ha vkl: custwakeup.gif
Ha vykl: custgoodbye.gif
Otklyuchenie melodii nA vklyuchenie:
Enter the menu "Opcode"
Menyu -> 048 263 *
Bvodim znacheniya:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "34" "OK"
Field 4 "1" "OK"
Field 5 (D) "000" "OK"
Results
F1: 0
Otklyuchenie melodii nA vyklyuchenie:Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "82" "OK"
Field 4 "1" "OK"
Field 5 (D) "163" "OK"
Otkat: Field 5 (D) "161" "OK"
Results
F1: 0
Date disappears and appears"byctpoe menu
B pezhime ozhidaniya otkloneniedzhoyctika ppivodit k popadaniyu:
-> Vppavo: Bpayzep
-> Vlevo: Poclednie vyzovy
-> Vvepx: CMC
-> Down: A Handbook
To activate the other hidden items to be done all the same, only need to use the following codes:
47 * 50 * 1 * 8 * 1 * 036 - inc. dictaphone
47 * 50 * 1 * 8 * 1 * 032 - Off. dictaphone
47 * 50 * 1 * 43 * 1 * 159 - inc. NETMONITOR (included: Menu, 00** 83786633 * OFF: MENU 00 ** 8378633 *)
47 * 50 * 1 * 43 * 1 * 156 - Off. NETMONITOR
47 * 50 * 1 * 44 * 1 * 016 - inc. menu item "roaming" (can not work, write that there is no space)
47 * 50 * 1 * 44 * 1 * 000 - Off. menu item "roaming"
47 * 50 * 1 * 59 * 1 * 252 - there will be new modes of vibration ring
47 * 50 * 62 * 1 * 1 * 169 - inc. strange empty menu.
47 * 50 * 62 * 1 * 1 * 137 - Off. strange empty menu
47 * 50 * 1 * 82 * 1 * 099 - inc. menu item "AIM" - "- messaging system for corporations based on AIM like ICQ.
47 * 50 * 1 * 82 * 1 * 035 - Off. menu item "AIM
47 * 50 * 1 * 84 * 1 * 119 - inc. menu item "Mobile QQ"
47 * 50 * 1 * 84 * 1 * 115 - Off. menu item "Mobile QQ" - a tool for instant messaging like ICQ. However, for its use need to create an account on the server and registration, as well as support for the operator.
